How To Install A Ceiling Medallion With Fan

Installing a ceiling medallion with a fan is a great way to add a touch of elegance and style to any room. It is a relatively simple project that can be completed in a few hours with just a few tools. Here are the steps on how to install a ceiling medallion with a fan.

Tools and Materials:

Ceiling medallion
Fan
Screwdriver
Drill
Measuring tape
Level
Wire cutters
Electrical tape
Safety glasses
Dust mask

Step 1: Turn Off the Power

Before you begin, turn off the power to the room at the circuit breaker or fuse box. This will help to prevent any electrical accidents.

Step 2: Remove the Old Fan

If there is an existing fan, remove it by unscrewing the mounting screws and disconnecting the electrical wires. Be careful not to damage the ceiling or wiring.

Step 3: Prepare the Ceiling

Clean the ceiling surface where the medallion will be installed. Remove any dust or debris. If the ceiling is uneven, you may need to level it out with a compound such as plaster of Paris. Let the compound dry completely.

Step 4: Install the Mounting Bracket

The mounting bracket should come with screws. If it does not, use screws that are long enough to penetrate the ceiling joists. Mark the location of the mounting bracket on the ceiling. Use a drill to make pilot holes for the screws. Install the mounting bracket by driving the screws into the pilot holes.

Step 5: Attach the Medallion

Apply a bead of adhesive to the back of the medallion. Press the medallion onto the ceiling. Use a level to make sure that the medallion is level. Hold the medallion in place for a few minutes to allow the adhesive to set.

Step 6: Install the Fan

Attach the fan blades to the motor. Connect the electrical wires from the fan to the electrical wires from the ceiling. Use wire nuts to secure the connections. Wrap electrical tape around the connections to prevent them from shorting out. Mount the fan to the mounting bracket. Screw in the mounting screws until the fan is securely attached.

Step 7: Turn On the Power

Once the fan is installed, turn on the power at the circuit breaker or fuse box. Test the fan to make sure that it is working properly.

Step 8: Enjoy Your New Ceiling Medallion

Congratulations! You have now installed a ceiling medallion with a fan. Enjoy your new updated look.